Valve Boxes

Type A

The Type A Valve Box is approved for use in the City of Regina and rural parts of Saskatchewan.

It features a drop lid and each valve box is treated with rust-proof paint to box to prevent corrosion once it is underground. 

WD46

The WD46 Valve Box is approved for use in the City of Winnipeg and City of Brandon. It features a hinged lid and each valve box is treated with rust-proof paint to prevent corrosion once it is underground.

WD46 PI

The new WD46 PI Valve Box is 60% lighter than a traditional WD46 valve box which allows for cost savings on installations, is non corroding and can protect you from costly compensation claims. It features a non-corrosive upper casing made from a polypropylene blend.  If your soils are 'hot" or aggressively corrode traditional valve boxes, the WD46 PI will be your solution.

It features a hinged lid and is approved for use in the City of Winnipeg and City of Brandon.

WD46 6" Cleanout

Contact us for further information regarding the WD46 6" Cleanout!

WD82

The WD82 Valve Box is approved for use in rural Manitoba and is approved by the Manitoba Water Services Board.It features a hinged lid and each valve box is treated with rust-proof paint to box to prevent corrosion once it is underground. 

WD82 PI

The new WD82 PI Valve Box is 70% lighter than the traditional WD82 Valve Box which allows for cost savings on installations and can protect you from costly compensation claims. It features a non-corrosive upper casing made from a polypropylene blend. If your soils are "hot" or aggressively corrode traditional valve boxes, the WD82 PI will be your solution.

It features a hinged lid and is used in rural parts of Manitoba and is approved by the Manitoba Water Services Board.

Service Boxes

Service Box up to 1" Curb Stop

WD Industrial manufactures a variety of Service Boxes, including:

• VB19 Small, 1/2"-1", XL Pipe, Cast Base

• VB19PBS Small, 1/2"-1", XL Pipe, Poly Boot

• VB19RP City of Regina Spec, Small, 1/2"-1", Stainless Steel Pipe, Poly/ABS Boot or Epoxy, Iron Top Cap c/w Magnet

• VB19SKN City of Saskatoon Spec, Small, 1/2"-1" Top Sect. 32mm Sch 40 Type 304 SS Pipe, Bottom Sect.: 25mm Sch 80 B.I. Pipe, Boot-Epoxy Coated as per spec.

• SB20C Small, 1/2"- 1", XL Pipe, ABS Base & Cradle

• SB20CB City of Brandon Spec, Small, 1/2"- 1", Copper Pipe, ABS Base & Cradle

• SB20CW City of Winnipeg, Small, 1/2"-1", Stainless Steel Pipe, ABS Base & Cradle, Magnet & Collar

• SB20CRS Small, 1/2"- 1", XL Pipe, ABS Boot & Cradle

• SB20CPA City of Prince Albert, Small, 1/2"-1", XL Pipe, ABS Boot & Cradle

Service Box up to 2" Curb Stop

WD Industrial manufactures a variety of Service Boxes, including:

• VB31 Large, 1-1/4" - 2", XL Pipe Cast Base

• VB31PB Large, 1-1/4" - 2", XL Pipe, Polymer Base

• VB31S Large, 1-1/4" - 2", XL Pipe, Iron Base

• VB31PBS Large, 1-1/4" - 2", XL Pipe, Polymer Base

• VB31RP City of Regina Spec, Large, 1-1/4" - 2", Stainless Steel Pipe, Poly Boot or Epoxy, Iron Top Cap c/w Magnet

• VB31SKN City of Saskatoon Spec, Large, 1-1/4" - 2", Top Sect: 32mm Sch 40 Type 304 SS Pipe, Bottom Sect: 25mm Sch 80 BI Pipe, Boot-Epoxy Coated as per spec.

• VB31PA City of Prince Albert, Large, 1-1/4" - 2", XL Pipe, ABS Boot & Cradle

• SB21CB City of Brandon, Large, 1-1/4" - 2", Copper Pipe, Poly Base, Magnet & Collar

• SB21CW City of Winnipeg, Large, 1-1/4" - 2", Stainless Steel Pipe, Poly Base, Magnet & Collar

Stainless Steel Rods

Stainless Steel Rods

Thanks to a new production process featuring a Robotic manufacturing line, we are now a preferred supplier of type 304 stainless steel operating rods. These rods are not affected by corrosive soil conditions and are the preferred option to traditional iron. We guarantee inventory levels allowing for secure delivery.

• local inventory

• quality controlled

• environmentally friendly

• secure delivery

• available sizing from 18" to 96"

The most exciting aspect of the new robotics line is that we can now be price competitive with off-shore suppliers, while providing our customers with a better product and better delivery.

Back To Top

WD216

Curb inlet designed to match the profile of the City of Winnipeg Modified Barrier Curb.

WD50S

Solid manhole cover designed to meet the City of Winnipeg Standard Construction Specifications  AP-005.

The WD50S is designed to fit the WD50F 10" high frame.

WD50G

Grated manhole cover designed to meet the City of Winnipeg Standard Construction Specifications AP-006.

The WD50G is designed to fit the WD50F 10" high frame.

WD51S

Solid manhole cover designed to meet the Manitoba Water Service Board Standard Construction Specifications. 

The WD51S is designed to fit the WD51F 6.5" high frame.

WD50F Lifter Rings

Manhole lifter rings designed to meet the City of Winnipeg Standard Construction Specifications    AP-007.

The lifter rings aredesigned to fit the WD 50F and are available in 1.5", 2", 2.5" and 3" heights. 

WD40 Boulevard Inlet

Boulevard inlet box solid cover designed to meet the City of Winnipeg Standard Construction Specifications AP-015.

WD51G

Grated manhole cover designed to meet the Manitoba Water Services Board Standard Construction Specification.

The WD51G is designed to fit the WD51F 6.5" high frame.

WD55

Mountable curb and gutter inlet frame and cover designed to meet the City of Winnipeg Standard Construction Specifications AP-011.

WD59

Barrier curb and gutter inlet frame, cover and valve box designed to meet the City of Winnipeg Standard Construction Specifications AP-008 & AP-009.

WD50GC

WD50GC Grated Composite Cover

WD50FC-6 FRAME

WD50SC

Flanges & Restraints

Pipe & Fitting Restrainers

WD Industrial offers C900 pipe restraints from 4" through 12" pipe for both fittings and pipe.

Fitting restrainers are a split ring design for easy installation.  Pipe restrainers are designed to grip the pipe and carry pressure rating of 150 psi with a 2 to 1 safety factor.

Miscellaneous 

Hose Ramps

The WDHR2 Composite Hose Ramp is ideal for temporary water services during water main renewals. The WDHR2 can be installed and removed with in minutes, is H20 rated, non-corrosive, interlocking, yellow, lightweight, and has hand holds for easy gripping.

Catch Basin Hood

Used by municipal waterworks, Catch Basin Hoods from WD Industrial Group are made from Royal Cast 4501, instant-set, polymer-rigid polyurethane. By using the Royal Cast 4501 for Catch Basin Hoods it will ensure a corrosion-free product.

Hydrant Marker

The WD Industrial Group hydrant marker allows for greater visibility of all hydrants.

Hydrant Wrench

To learn more about the WD Hydrant Wrench, contact us!

Iron Body Cleanouts

Raised Heads

• A2000 RH2" Bayco IBC Complete

• A3000 RH3" Bayco IBC Complete

• A4000 RH4" Bayco IBC Complete

• A6000 RH6" Bayco IBC Complete

• 2002 RH2" Brass Cover Only

• 3002 RH3" Brass Cover Only

• 4002 RH4" Brass Cover Only

• 6002 RH6" Brass Cover Only

Countersunk

• A2000 CH2" Bayco IBC Complete

• A3000 CH3" Bayco IBC Complete

• A4000 CH4" Bayco IBC Complete

• A6000 CH6" Bayco IBC Complete

• 2003 CH2" Brass Cover Only

• 3003 CH3" Brass Cover Only

• 4003 CH4" Brass Cover Only

• 6003 CH6" Brass Cover Only